manualshive.com logo in svg

Stihl BC 230, Instruction Manual, Page: 11 / 20

Share
Download
Stihl BC 230 Instruction Manual Download Page 11

► Prepare engine for start,   8.2 and then start

the engine,   8.3.

When can the engine be started without prepara‐

tion?
The engine can be started without preparation if

it has been running for at least 1 minute and only

shut down for a short work break.

► Starting the engine,   8.3.

8.2

Preparing Engine for Start

A video is available for this chapter

www.stihl.com/sxaYXy

► Select the correct starting procedure.

► Place the cultivator on a level surface so that

the blades do not touch the ground or other

objects.

2

1

3

4

5

0000-GXX-5891-A0 

► Press the manual fuel pump bulb (1) at least

five times.

► Move the choke lever (2) to position  .

► Press down the throttle trigger lockout (4) and

hold it there.

► Pull the throttle trigger (5) and hold it there.

► Move the slide control (3) to position 

and hold it there.

► Release the throttle trigger (5) and lockout

lever (4).

The slide control (3) engages in position

.

0000-GXX-6436-A0

► Hold the cultivator firmly with your left hand on

the frame and press down.

► Pull the starter grip slowly with your right hand

until you feel it engage.

► Pull the starter grip quickly and allow the

starter rope to rewind several times until the

engine fires and stops.

► If the engine does not stop: Move the choke

lever (2) to position   so that the engine does

not flood.

The engine stops.

8.3

Starting the Engine

A video is available for this chapter

www.stihl.com/sxaYXy

► Select the correct starting procedure.

► Place the cultivator on a level surface so that

the blades do not touch the ground or other

objects.

3

4

5

1

0000-GXX-5892-A0 

► Move the choke lever (1) to position  .

► Press down the throttle trigger lockout (4) and

hold it there.

► Pull the throttle trigger (5) and hold it there.

► Move the slide control (3) to position 

and hold it there.

► Release the throttle trigger (5) and lockout

lever (4).

The slide control (3) engages in position

.

0000-GXX-6436-A0

► Hold the cultivator firmly with your left hand on

the frame and press down.

► Pull the starter grip slowly with your right hand

until you feel it engage.

8 Starting and Stopping the Engine

English

0458-495-0121-B

11

Summary of Contents for BC 230





















Reviews:

No comments