![background image](http://html1.mh-extra.com/html/stihl/ar-900/ar-900_instructions-for-use-manual_1378411034.webp)
AR 900
English
32
The LED (3) on the charger comes on
when the battery is inserted – see "LED
on Charger".
Charging begins as soon as the
LEDs (4) on the battery glow green –
see "LEDs on Battery".
The charge time is dependent on a
number of factors, including battery
condition, ambient temperature, etc.,
and may therefore vary from the charge
time in the "Specifications".
The battery becomes hot during
operation. If a hot battery is inserted in
the charger, it may be necessary to cool
it down before charging. The charging
process begins only after the battery has
cooled down. The time required for
cooling may prolong the charge time.
AL 300, AL 500 Chargers
The charger is equipped with a fan
End of Charge
The charger switches itself off
automatically when the battery is fully
charged:
–
LEDs on the battery go off.
–
The LED on the charger goes off.
–
The charger's fan is switched off.
Remove the adapter from the charger.
The LEDs show the battery's state of
charge and any problems with the
battery or the power tool being used.
N
Press button (1) to activate the
LEDs – the display goes off
automatically after 5 seconds.
–
The acoustic signal must sound
briefly when the button is released
(to confirm function) – see also
"Acoustic Signal".
The LEDs can glow or flash green or
red.
4
3
4865BA013 KN
LEDs on Battery
LED glows continuously green.
LED flashes green.
LED glows continuously red.
LED flashes red.
4865BA025 KN
1
AR 900 Lithium-Ion