background image

0458-794-9921-C

15

English 

17 Troubleshooting

17.1 Troubleshooting Battery or Cordless Product

17 Troubleshooting

Condition

LEDs and beeps

Cause

Remedy

Cordless product 

does not run after 

switch-on or cuts out 

during operation.

1 LED flashes 

green and 4 long 

beeps sound.

Battery has low charge.

► Recharge the battery fully as described in the 

instruction manual for the STIHL AL 300 and AL 

500 chargers.

1 LED glows red.

Battery too hot or too cold. ► Disconnect the battery.

► Allow battery to cool down or warm up.

3 LEDs flash red. There is a malfunction in 

the battery.

► Disconnect battery and then reconnect it.
► Switch on the cordless product.
► If 3 LEDs continue to flash red: Contact a STIHL 

servicing dealer for assistance.

3 LEDs glow red.

Cordless product too hot. ► Disconnect the battery.

► Wait for cordless product to cool down.

4 LEDs flash red 

and short beeps 

sound in quick 

succession.

There is a malfunction in 

the battery.

► Take the battery off your back.
► Disconnect battery and then reconnect it.
► Switch on the cordless product.
► If 4 LEDs continue to flash red and short beeps 

sound in quick succession: Do not use or transport 

the battery, contact your STIHL servicing dealer.

No electrical contact 

between cordless product 

and battery.

► Disconnect battery and then reconnect it.
► If the cordless product still does not run when 

switched on or cuts out during operation: Clean 

contacts of the connecting cable.

Cordless product or battery 

damp.

► Allow cordless product / battery to dry.

Runtime of cordless 

product is too short.

Battery not fully charged.

► Recharge the battery fully as described in the 

instruction manual for the STIHL AL 300 and AL 

500 chargers.

Normal battery life has 

been exceeded.

► Replace the battery.

Charge process does 

not start when AP 

adapter is inserted in 

the charger.

1 LED glows red.

Battery too hot or too cold. ► Leave AP adapter in the charger.

Charge process starts automatically as soon as 

permissible temperature range is reached.

Summary of Contents for AR 1000





















Reviews: