Technical Information 08.2005
Page 3
TI_08_2005_11_01_02.fm
1.2
Control handle
For simplified starting, the choke does not have to
be set on the control handle.
Since the setting lever does not lock at
"Engine Stop" (
0
), the ignition system is
continuously ready to operate, and the blower can
be started at any time.
.
Setting lever (
1
)
.
Throttle trigger (
2
)
Engine stop (0)
.
The ignition system is sent a stop pulse to shut
off the blower.
.
The setting lever does not lock but rather
springs back – the ignition system is
automatically ready to operate.
Operating position (
#
)
.
The engine is running or can start – the throttle
trigger can be smoothly actuated.
Set locked position (
C
)
.
The throttle trigger can be locked at three levels:
1/3 gas, 2/3 gas and full throttle.
.
To release the locked position, set the setting
lever to
#
.
1.3
Simplified starting
All operating elements for starting are on a central
control area. Set the starting throttle position with
the choke knob. The choke knob automatically
springs back into operating position after the throttle
trigger is actuated.
.
Press the fuel pump bulb at least five times.
.
Setting the choke knob:
When the engine is cold
l
When the engine is hot
n
.
Pull the cord until the engine starts; at the latest,
set the choke knob to starting throttle position
n
after the third time the cord is pulled.
.
Set the choke knob to the starting throttle
position
n
.
Continue cranking until the engine runs.
To switch to idle:
.
Pull the throttle trigger - the choke knob
automatically jumps to operating position
#
or
.
Set the choke knob manually to
#
1
2