► If the outside temperature is below -10°C or
the engine is cold:
► Start the engine.
► Fit the carrying system.
► Hold and guide the brushcutter.
► Warm up the engine at full throttle for about
1 minute.
► Shut off the engine.
► Remove the cutting attachment.
This allows the brushcutter to reliably adjust
itself to the optimum performance.
1
min
A
B
C
s
> 40 s
30-60 s
0000099676_001
► Move the choke lever to position .
► Start the engine without depressing the throttle
trigger.
The engine runs and the choke lever remains
in position .
► Run the engine for at least 30 seconds but no
more than 60 seconds (A) without depressing
the throttle trigger.
► Hold and guide the brushcutter in such a way
that the gearbox does not touch the ground or
other objects.
NOTICE
■ The calibration process is aborted if the throt‐
tle trigger is released before the trigger is
properly calibrated. It is then necessary to
restart the calibration process.
► Keep the throttle trigger fully depressed.
NOTICE
■ The trimmer can be incorrectly calibrated if the
throttle trigger is not kept fully depressed dur‐
ing calibration. This can damage the brushcut‐
ter.
► Keep the throttle trigger fully depressed.
► Depress the throttle trigger for at least 40
seconds (B) and hold it in that position.
The engine accelerates and the trimmer is
calibrated. The engine speed fluctuates and
increases perceptibly during calibration.
► If the engine stalls: Make another attempt to
calibrate the trimmer.
► If the engine stops repeatedly: Do not use
your trimmer and contact your STIHL servicing
dealer for assistance.
The brushcutter is defective.
► As soon as the engine speed drops noticeably
(C): Release the throttle trigger.
The engine runs at idling speed. The brushcut‐
ter is calibrated and ready for use.
► Shut off the engine.
► Mount the cutting attachment.
11.4
Holding and Controlling the
Trimmer
0000-GXX-8177-A0
► Carry the trimmer on your back.
► Hold the trimmer firmly with your right hand on
the control handle – wrap your thumb around
the handle.
► Hold the trimmer with your left hand on the
loop handle – wrap your thumb around the
loop handle.
11.5
Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
A
B
0000090918_002
Mowing with a mowing head (A)
► Swing the brushcutter steadily back and forth
in an arc.
► Move forward slowly in a controlled manner.
Mowing with a grass cutting blade or brush
knife (B)
► Mow with the left part of the metal cutting
attachment.
► Move forward slowly in a controlled manner.
11 Operating the Trimmer
English
0458-771-0101-A
17
Summary of Contents for 4147
