11
Series 4141 Powerhead
– Remove wiring from the guide in
the shroud.
Install in the reverse sequence.
Troubleshooting chart - see
"Standard Repairs, Trouble-
shooting" handbook.
Warning!
To reduce the risk of burn injury, do
not touch hot parts of exhaust
system.
Allow exhaust system to cool down
first.
Spark arresting screen
– Remove shroud - see 5.1.
Use screwdriver to pry stub out of
muffler outlet. Remove the stub.
– Clean the spark arresting screen
VA
380RA010
or fit a new stub (with screen) if
necessary.
Exhaust muffler
– Remove shroud - see 5.1.
Remove screws (arrows) from
mufler (1).
Remove exhaust gasket (2) and
VA
380RA011
1
2
fit a new one.
Reassemble in the reverse
sequence.
– Tighten down muffler screws to
8 Nm (5.9 lbf.ft).
– Fit the shroud.
5.2
Exhaust Muffler/
Spark Arresting Screen
Summary of Contents for 4141 Series
Page 1: ......
Page 43: ...42 Series 4141 Powerhead ...
