Different air filters may be installed to
adapt the machine to the prevailing
operating conditions:
)DEULFILOWHU
for normal cutting
conditions and winter operation
)OHHFHILOWHU
for dry and very dusty
work areas
&OHDQWKHDLUILOWHU
ZKHQWKHUHLVDQRWLFHDEOHORVVRI
HQJLQHSRZHU
•
Set Master Control lever
to
O
.
•
Turn the twist lock
above the
rear handle 90° counterclockwise
(lower illustration).
•
Lift off the carburetor box cover
vertically.
•
Clean away loose dirt from around
filter.
•
Unscrew the slotted nuts
.
•
Remove filter.
•
Separate the two halves of the filter.
•
Take the foam element
out of
the front half of the filter
and
clean or replace it.
•
Knock out both elements or blow
out with compressed air from the
inside outward.
$IWHU)LQLVKLQJ:RUN
•
Slacken off the chain if you have
retensioned it at operating
temperature during cutting work.
The chain contracts as it cools down.
If it is not slackened off, it could damage
the crankshaft and bearings.
%HIRUHVWRULQJ\RXUVDZ
IRUDORQJSHULRG
See chapter “Storing the machine”.
138BA002K
4
138BA005K
$LU)LOWHU6\VWHP
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
46
Summary of Contents for 036 QS
Page 1: ......