•
Place your saw on the ground.
Make sure you have a firm footing.
Check that chain is not touching any
object or the ground.
Bystanders must be well clear of
general work area of the saw.
•
Hold the saw firmly on the ground
with your left hand on the front
handle -
your thumb should be under
the handle.
•
Put your right foot into the rear
handle and press down.
Alternative method of starting:
•
Hold the rear handle tightly
between your legs, just above the
knees.
•
Grip the front handle firmly with
your left hand -
your thumb should be under the
handle.
•
Pull the starter grip slowly with your
right hand until you feel it engage -
then give the grip a brisk strong pull
and push down the front handle
at the same time -
do not pull out starter rope more
than 70 cm (about 28 in) - it might
break.
Do not let the starter grip snap back
- guide it slowly into the housing
so that the starter rope can rewind
properly.
If engine is new, pull starter grip
several times to prime the fuel line.
143BA018 KN
143BA020 KN
143BA019 KN
46
Summary of Contents for 036 QS
Page 1: ......
