EN - 21
TIPPING SEAT FORWARD
(Figure 8)
Move steering levers to neutral position and
rotate handles outward. Tip seat forward.
OPENING AND CLOSING
BONNET
(Figure 9)
Open:
Tip seat forward and pull up on the back of
the bonnet until bonnet rests on the bonnet
stops.
Close:
Push down on back of bonnet to close.
MOWER DECK REMOVAL AND
INSTALLATION
Remove
(Figure 10)
1. Remove PTO belt from the engine drive
pulley. See
Replacing PTO Belt
on
page 28.
2. Disconnect drag link from the front deck
bracket.
3. Disconnect front and rear trunnions from
the lift arms on both sides of the unit by
removing the 3/8" nuts. Keep hardware
for reinstallation.
4. Slide mower deck out from under unit.
Install
(Figure 10)
1. Slide mower deck under unit.
2. Connect drag link to front deck bracket.
3. Connect front and rear trunnions to the
lift arms on both sides of the unit using
3/8" nuts.
4. Install PTO belt on the engine drive
pulley. See
Replacing PTO Belt
on
page 28.
5. Level and adjust pitch of mower deck.
See
Levelling and Adjusting Pitch of
Mower Deck
on page 22.
SERVICE AND
ADJUSTMENTS
WARNING:
AVOID INJURY.
Read and understand the entire
Safety
section before proceeding.
Figure 8
1. Seat Tipped Forward
2. Mounting Hardware
3. Steering Levers
1
2
3
Figure 9
Bonnet Tipped
Open
Summary of Contents for ZERO TURN MOWER 915333
Page 2: ......
