Stiga SD 98-108, Owner'S Manual

Page: 79 / 144

21 EN
Both have the necessary knowledge and
equipment to ensure that the work is done
correctly without affecting the safety of the
machine.
All and any operations performed in unau­
thorised centres or by unqualified persons
will totally invalidate the warranty and all
obligations and responsibilities of the
manufacturer.
You must go to a specialised Service
Centre or contact your Dealer if the follow­
ing are malfunctioning:
– the brake;
– the engagement and stop of the blades;
– the drive engagement in forward and in
reverse gears.
6.2 ROUTINE MAINTENANCE
The table is to help you maintain your machine’s
safety and performance. It summarises the main
interventions to be made and the frequency
applicable to each of them.
The boxes at the side are for you to mark the
date or number of working hours at which the
intervention was made.
6.1 SAFETY RECOMMENDATIONS
WARNING!
Before cleaning or
doing maintenance work, take out the igni­
tion key and read the relevant instructions.
Wear adequate clothing and work gloves
whenever your hands are at risk.
WARNING!
Never use the ma­
chine with worn or damaged parts. Faulty
or worn­out parts must always be replaced
and not repaired. Only use original spare
parts: The use or non­original and/or in­
correctly fitted parts will compromise the
safety of the machine, may cause acci­
dents or personal injuries for which the
Manufacturer is under no circumstance li­
able or responsible.
IMPORTANT
Never dispose of used
oil, fuel, batteries or other pollutants in unau-
thorised places!
WARNING!
Any adjustments or
maintenance operations not described in
this manual must be carried out by your
Dealer or a specialized Service Centre.
6. MAINTENANCE
Operation Hours Completed (Date or Time)
1. MACHINE
Check of fastening and sharpness of blades
3)
25
Blade replacement
3)
100
Transmission belt check
3)
25
Transmission belt replacement
2) 3)
–
Blade belt check
3)
25
Blade belt replacement
2) 3)
–
Drive adjustment and check
3)
25
Blade brake and engagement check
3)
25
Bolt and screw check 25
General lubrication
4)
25
2. ENGINE
1)
Engine oil change .....
Air filter cleaning and check .....
Air filter replacement .....
Fuel filter check .....
Fuel filter replacement .....
Spark plug contacts check and cleaning .....
Spark plug replacement .....