EN - 13
13. TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
SOLUTION
1.
The machine does not
start when the throttle
control is activated
Battery is not inserted or
is inserted incorrectly
Make sure that the battery is
inserted correctly (para. 7.2.3)
Low battery
Check the battery status and recharge
if necessary (para. 7.2.2)
Faulty throttle control or
damaged blower
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
2.
The motor shuts
down whilst working
Battery is not inserted correctly
Make sure that the battery is
inserted correctly (para. 7.2.3)
Low battery
Check the battery status and recharge
if necessary. (para. 7.2.2)
3. The rotor rotates, but
the air does not come
out from the blower tube
Blocked or clogged blower tube
Stop the machine,
remove the battery
and remove any obstructions.
4. Excessive noise and/or
vibration is experienced
whilst working
Loose or damaged parts
Turn off the machine
remove the battery and:
–
inspect for damage;
–
check for and tighten any loose parts;
–
have any damaged parts replaced
or repaired with parts having
equivalent specifications.
5.
The machine gives off
smoke whilst working
Damaged blower.
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
6.
Battery power
reserve is low
Severe working conditions
requiring greater
current absorption
Optimise operations
(para. 7.2.1)
Battery is insufficient for
operating requirements
Use a second battery or extended
battery (para. 14.1)
Decrease in battery capacity
Purchase a new battery
7.
The battery charger
is not recharging
the battery
Battery is not correctly inserted
in the battery charger
Check it is correctly inserted (para. 7.2.2)
Unsuitable environmental conditions
Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual)
Dirty contacts
Clean the contacts
The battery charger is not energised
Check it is plugged in and the
power socket is energised
Faulty battery charger
Replace with an original spare part
If the problem persists, refer to the battery/
battery charger manual
If problems persist after implementing the solution, contact your Dealer.
Summary of Contents for BL 40 Li
