Stiga Autoclip M3, Operator'S Manual

Page: 22 / 254

20
User’s manual
EN
USE AND OPERATION
REQUIREMENTS FOR USE
Important
-
When using the robot for the first time, carefully read the entire manual and be sure to fully understand
it, especially the safety recommendations.
-
Only use the robot for its intended purpose as described by the Manufacturer and do not tamper with
any device to obtain different operating performances.
-
Do not use the robot and its peripheral units in bad weather conditions, especially when there is a risk
of lightning.
DESCRIPTION OF CONTROL PANEL AND MENU OVERVIEW
The illustration shows the location and function of the controls on the machine.
STOP
STOP.
Press to stop the robotic mower safely. Only use in
case of imminent danger and to perform maintenance
on the robot.
ON / OFF
Press to turn the robot on and off.
AUTO
START / PAUSE
HOME
ALERT
AUTO
ON / OFF
STOP
Press to enable or disable automatic operation.
When in automatic mode, the robot is programmed
to work according to the program described in the
following pages.
AUTO
Off: Manual operation.
Fixed on: Automatic operation.
Battery charge level.
ALERT
Operating errors. Refer to the chapter
“TROUBLESHOOTING”
Robot in charging station (AUTO LED off)
START / PAUSE
Press to start a manual work cycle. If the battery is sufficiently charged and the AUTO LED is off, the robot starts a
work cycle. When the work cycle is completed, it goes back to the charging station.
Robot in the garden
START / PAUSE
When the robot is moving, this suspends the mowing operation and places the robot in stand-by mode.
With the robot in Stand-by, this allows resuming the mowing operation.
HOME
Returns to the charging station and resumes automatic or manual operations depending on the status of the “AUTO”
LED.