Page 36 of 41
INFO
You can use the “Reset min/max
temp.” setting to clear the min/max
measurements in all temperature
listings and to fill “Today” with the
current value.
The Temperature, Counters and
Timers, feed system and animal
weighing screens are identical to
menu option “Overviews”.
ANIMAL DATA
TO MUTATE
If there are more groups of animals, you can enter the following data per group of animals. Use the
and
keys to select the next/previous group of animals.
Lost
You can set up to 5 different categories of lost (see “Configuration lost”)
Dead
Enter the number of animals which have lost at this moment (per group of animals).
“Today's” mortality (or death rate) is increased automatically by the value entered after
which the entry is erased.
Dead “Today”
Today's total mortality. If you have entered an incorrect value you can correct this by
changing the value below “Today”.
Dead “Total”
"Total" shows the total mortality calculated using the mortality of the previous days and
of “Today”
Selection .. Lost 5
See “Dead”.
Out
Enter the number of animals that has been removed.
Out “Total”
The “Total” number of animals removed.
In
Fill in the number of animals that were added.
In “Total”
The “Total” number of animals added.
Animals present
This is the sum of the number of animals at the time of entry – the total mortality - total
out + total in.
Number at entry
This is the number of animals at the time of entry.