Page 28 of 30
BRIGHTNESS
on
: Background lighting brightness as a percentage during the “On time”.
Off
: Background lighting brightness as a percentage after the “On time” has elapsed.
On-time
: Number of seconds during which the screen is lit with the “Brightness” “On” percentage after the
last time a key was pressed.
Set 0 seconds: the light does not switch off, the “On time” for the “Remote control” is set to 300
seconds.
DATE AND TIME
Set the date and time, and “Beginning new day”.
REMOTE CONTROL
Stienen BE does not accept any responsibility for any damage or loss when the “Remote control” is used. You
have to ensure that there is a secure LAN environment, protected by a firewall.
If the installer has activated “Remote control”, the menu will feature the
option.
If the KL-6500 is connected to a network, an IP address (IPv4 address) will automatically be assigned to the
controller after you have entered the codes. You need this IP address in order to connect to the device through
the browser.
1.
Set the “Remote control” slider to the
position.
2.
Enter a user code (the code must not be 0000).
3.
Enter an access code (the code must not be 0000).
4.
Write down the IP address.
