If the software version of a module or peripheral device does not comply with the
requirements of the operating software, you have to perform a software update for the
module and/or peripheral device.
DO NOT USE A PRESSURE CLEANER ON THE RH OR CO2 SENSORS OR THE
MEASURING FAN
Remove the RH sensor and CO2 sensor from the room and store them
somewhere safe before cleaning the room. Also screw the protection caps
onto extension cable plugs to prevent water from penetrating into the
plugs. If the sensor is connected via a fixed socket outlet (FSO), push on
the flap of the fixed socket outlet until you hear it click (lock).
Application notes
Central ventilation
KL64CV-N-ENxxxxx
Compensations
KL64CS-N-ENxxxxx
Cooling
KL64CC-N-ENxxxxx
Data communication between climate computers
KL64DC-N-ENxxxxx
General description
KL64GD-N-ENxxxxx
Heat exchanger
KL64HE-N-ENxxxxx
Heating controls
KL64HC-N-ENxxxxx
MCA flap (central MCA flap)
KL64MF-N-ENxxxxx
Remote control
KL64RC-N-ENxxxxx
Timer (central timer)
KL64TC-N-ENxxxxx
Ventilation control (air mixing fan, bypass flap, inlet flap etc.)
KL64VC-N-ENxxxxx
Attachments
AQC-G-Table
AQC-G-B-ALxxxxx
xxxxx = version number application note/attachment