Stieber Clutch
Page 19/21
M1016E_0
Assembly and maintenance manual
Secure the outer race in the torque-supporting machine element with the
appropriate fixing screws (e.g. as per standard DIN EN ISO 4762) and with screw
quality 10.9 or 8.8; tightening torque (see Table Tightening torque)
Tightening torque [Nm]
Size
8.8
10.9
M6
10 14
M8
25
34
M10
48 68
Table: Tightening torque (
according VDI 2230 Sheet1, µ=0.12 metric standard thread)
Check overrunning. The one-way clutch must be able to be turned easily in the
overrun direction of rotation
WARNING
Risk of injury due to incorrect assembly!
Faulty installation and maintenance can cause severe property
damage and personal injury.
Installation, maintenance and repair work may only be performed
by personnel with the requisite training and expertise.
WARNING
Risk of injury due to moving components!
Rotating driven components can cause the most severe injuries.
Therefore, during operation:
It is strictly forbidden for persons to loiter in the danger zone
or in its immediate vicinity.
Do not disable, render unusable or circumvent safety
equipment and / or safety functions.
Prior to entering the danger zone:
Switch off the power supply and secure it against being
switched on again.
Wait for lagging components to come to a standstill.
CAUTION
Risk of injury due to falling components!
The outer race or inner race can fall down if the transportation lock
has been removed.
Fasten the outer / inner race axially.
Procedural steps:
Loosen the fastening screws of the outer race (1)
Remove the axial retention of the inner race (2)
8 Disassembly
