![background image](http://html1.mh-extra.com/html/stiebel-eltron/twg-1/twg-1_operating-and-installation_1376874020.webp)
INSTALLATION
Preparation
20 |
TWS, TWG
9. Preparation
9.1 Installation site
f
f
Install the appliance in a well vented, dry room that is free
from the risk of frost.
9.2 Storage
f
f
Store the appliance in a dry location in its original
packaging.
f
f
We recommend covering the appliance to protect it from
dust and dirt.
f
f
If the appliance is to be stored for an extended period,
pumps and actuating devices may have to be moved by
hand. This is to prevent seizing of the assemblies.
9.3 Transport
f
f
If possible, transport the appliance in its original
packaging.
10. Installation
!
Material losses
Only use open-ended spanners of the right size to
tighten and release screw connections.
10.1 Appliance installation
f
f
Only install the appliance after all necessary welding and
soldering work has been completed.
f
f
Select fixing materials in accordance with the wall con-
struction/condition. In case of non-load bearing masonry,
mount the appliance on a frame stand.
f
f
existing installation ducts or casings for installation on
finished or unfinished walls, which are available as acces-
sories, can be used for wall mounting.
10.1.1 Finished walls
Installing the casing for finished walls
d
00000
75
18
9
f
f
The casing for finished walls is available as an installation
option or accessory; guide its recesses from above onto
the side hooks of the appliance mounting plate.
Removing the casing door
f
f
Open the latch of the casing door.
f
f
Tilt the casing door forwards. Lift the rebate of the casing
door from the frame.