EN
G
L
ISH
INSTALLATION
ON END WITH SUPPORT
SOL BB
| 31
6.4.2 Fitting the L-bracket to the lower roof hooks
2
6
_0
5_0
1
_066
4
18
19
9
16
17
8
2
2 Roof hooks
8 M10 nut
9 Screw M10
16 Pivoting bracket
17 Screw M6
18 M6 nut
19 M6 washer
f
Secure one L-bracket with a M10 screw and a M10 nut to
the roof hook. Insert the screw through the centre hole
on the long side of the L-bracket. The short side of the L-
bracket must be at the top.
f
Secure the short side of the second L-bracket to the short
side of the L-bracket fitted to the roof hook. Use the M6
screw, washer and nut.
6.4.3 Bracing the support
From two collectors upwards, you need to connect the cen-
tre field with a brace. When installing four collectors or more,
brace both end fields. From six collectors upwards, arrange
additional braces in one inner field.
f
Secure the collector strip to the lower roof hook through
the second hole.
Note
After fitting one support, fit the collector strip to the
L-brackets.
f
Secure the collector strip to the upper roof hook through
a suitable slot.
6.5 Installing profile rails
6.5.1 Lower profile rail
f
Insert one screw on the left and one on the right side of
the profile rail channel.
f
Fit the profile rail by pushing the inserted screws through
the bottom hole in the collector strip.
f
Fit a nut to the screw at the bottom of the collector strip.
2
6
_0
5_0
1
_0486
5
3
9
3 Collector strip
5 Profile rail
9 Screw M10
6.5.2 Upper profile rail
f
Insert one screw each on the left and one on the right side
into the channel of the upper profile rail.
f
Fit the profile rail by pushing the inserted screws through
the second hole from the top into the collector strip.
f
Fit a nut to the screw at the bottom of the collector strip.
2
6
_0
5_0
1
_0
5
7
9
3
5
9
8
3 Collector strip
5 Profile rail
8 M10 nut
9 M10x20 screw
