EN
GL
ISH
WWW.STIEBEL-ELTRON.COM
LWZ 170 E PLUS / LWZ 370 PLUS |
11
INSTALLATION
Appliance description
8. Appliance description
8.1 Standard delivery
The following are delivered with the appliance:
- Wall mounting bracket set (2 mounting brackets, 3 protec-
tive caps, 1 rubber strip, 2 rubber rings, 1 set of installation
instructions)
- PVC condensate drain connection (1 plastic nut 1.5”, 1 sealing
ring, 1 glued joint PVC fitting 32 mm)
- Approx. 90 cm long cable for connecting a remote control
8.2 Required accessories
- Hardwired remote control used to control the air flow rates
preset in three stages. Our range of accessories includes re-
mote control units with additional functions.
8.3 Further accessories
You can also obtain ventilation pipes, extract air and supply air
valves and similar accessories from us.
9. Preparations
9.1 Installation site
The appliance can be mounted on the wall with the wall mounting
bracket set supplied.
!
Material losses
For vibration-free mounting, a solid wall with a minimum
mass of 200 kg/m
2
is required.
A plaster board or metal
framed wall is inadequate. Additional measures such as
a double skin or additional supports would be needed
in such cases.
Ensure the equipment is level after installation.
The installation site must have an adequate condensate drain with
stench trap and a fall for the condensate.
The installation site must be free from the risk of frost.
9.2 Transport
To protect the appliance against damage, you should transport it
to the installation room inside its original packaging.
10. Installation
10.1 Mounting the appliance
10 mm
26
�0
4�
15
�0
07
8
f
f
Undo the two top crosshead screws on the back of the
appliance.
f
f
Secure one of the two rails to the appliance with screws.
!
Material losses
f
f
Check whether the wall can bear the weight of the
appliance.
f
f
Use appropriate rawl plugs and screws suitable for
the wall structure to attach the rail.
f
f
Mount the second rail on the wall as a retainer. To avoid
sound transmission, place the washers supplied between the
wall and the rail.
f
f
Affix the spacers supplied to the back of the appliance.
26
�0
4�
15
�0
07
9
f
f
Place the rubber strips supplied on the rail mounted on the
wall. The rubber strips are also meant to provide additional
anti-vibration separation.
f
f
Fit the appliance so that the two rails interlock.
