oPErATIoN
Appliance description
EN
GL
ISH
www.stiebel-eltron.com
ETS 200-700 Plus |
31
WARNING Burns
Never operate this appliance...
-
if the distance from adjacent objects or other flam-
mable materials would be less than the minimum
permissible distance.
-
in rooms where it is at risk of fire or explosion as a
result of chemicals, dust, gases or vapours. Venti-
late the room sufficiently before heating.
-
in the direct proximity of pipes or receptacles that
carry or contain flammable or explosive materials.
-
if work such as laying tiles, sanding or sealing is
being carried out in the installation room.
-
if an appliance component is damaged or there is a
fault.
WARNING Burns
-
Never place any flammable, combustible or insulat-
ing objects or materials on the appliance or in direct
proximity to it. Do not lean any objects against the
appliance. This can cause a build-up of heat, lead-
ing to an excessive temperature in the surface of
the casing and in such objects.
-
Ensure that the air intake and discharge are never
blocked.
-
Never place any objects between the appliance and
the wall.
CAUTION Burns
The surfaces of the appliance casing and the expelled
air can become very hot during operation (above 80 °C)
and can cause burns. Particular caution is advised when
children or vulnerable persons are present.
WARNING Overheating
To prevent the appliance from overheating, never cover
it with anything.
2.3 Test symbols
See type plate on the appliance. The type plate is located on the
left side panel of the appliance.
3. Appliance description
This appliance is designed to store electrically generated heat. The
electrical heat is generated when the power supply utility enables
the supply of cheaper off-peak power.
The times when this supply is enabled depend on the relevant
power supply utility. The times when it is enabled are predomi-
nantly at night.
Subject to the required room temperature, the stored heat is
transferred to the room as hot air via a fan, and partially via the
appliance surface.
4. Operation
D
00000
74
96
8
1
1 Programming unit
4.1 Programming unit
The appliance is operated using the programming unit which is
located at the top right of the appliance front.
Made in Germany
D
00000
74
97
0
2
1
1 Display
2 User interface
4.1.1 User interface
Button
designation
description
"Fan" button
Switching fan enabling on and off
"OK" button
Selection;
Confirm settings
"Menu" button
Call up and exit menu
"+" button
Call up menu items;
Change settings
"–" button
Call up menu items;
Change settings
