![background image](http://html.mh-extra.com/html/stiebel-eltron/dhf-13-c/dhf-13-c_operating-and-installation_1376540010.webp)
26
|DHF-C
www.stiebel-eltron.com
INSTALLATION
Commissioning
!
Material losses
If you cut open the wrong knock-out in the appliance
cover by mistake, you must use a new appliance cover.
f
f
Secure the back panel with an additional screw at the
bottom.
f
f
Secure the connection pipes to the appliance.
f
f
Cleanly break out the knock-outs in the appliance cover. If
necessary, use a file.
f
f
Click the cover guides into place in the openings.
10.3 Completing the installation
f
f
Open the shut-off valve in the tee.
11. Commissioning
WARNING Electrocution
Commissioning may only be carried out by a qualified
contractor in accordance with safety regulations.
11.1 Initial start-up
compact contr ol
compact contr ol
26
�0
2�
02
�0
45
2
f
f
Open and close all connected draw-off valves several times,
until all air has been vented from the pipework and the
appliance.
f
f
Carry out a tightness check.
f
f
Fit the appliance cover. Check that the appliance cover is
seated correctly.
f
f
Secure the appliance cover with a screw.
f
f
Insert the cap. Turn it clockwise as far as it will go.
f
f
Latch the output selector into place. To do this, turn it fully
anti-clockwise and clockwise.
f
f
Switch the mains power ON.
f
f
Check the function of the appliance.
f
f
Remove the protective foil from the control fascia.
Appliance handover
f
f
Explain the functions of the appliance to the user. Show the
user how to operate the appliance.
f
f
Make users aware of potential dangers, especially the risk of
scalding.
f
f
Hand over these instructions.
11.2 Recommissioning
Vent the appliance and the cold water inlet line (see chapter "In-
stallation / Settings").
See chapter "Installation / Commissioning".
12. Shutdown
f
f
Isolate all poles of the appliance from the power supply.
f
f
Drain the appliance (see chapter "Installation /
Maintenance").