![background image](http://html1.mh-extra.com/html/stiebel-eltron/234783/234783_operation-and-installation_1376596018.webp)
OPERATION
SAFETY
18 |
SOKI 7 E plus | SOKI E trend
1.3 Other symbols in this documentation
Note
General information is identified by the adjacent sym-
bol.
f
f
Read these texts carefully.
Symbol
material losses
(appliance damage, consequential losses and environ-
mental pollution)
Appliance disposal
f
f
This symbol indicates that you have to do something. The
action you need to take is described step by step.
1.4 Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2. Safety
2.1 General safety instructions
26
�0
5�
01
�06
82
�
1
1 Safety valve
!
WARNING Injury
The appliance may be used by children aged 8 and
up and persons with reduced physical, sensory
or mental capabilities or a lack of experience and
know-how, provided that they are supervised or
they have been instructed on how to use the appli-
ance safely and have understood the resulting risks.
Children must never play with the appliance. Chil-
dren must never clean the appliance or perform user
maintenance unless they are supervised.
WARNING Burns
The product has a safety valve.
With safety valves there is a risk of scalding from the
expulsion of steam.
!
WARNING Injury
Closing the ball valve in the solar compact installa-
tion and the ball valve possibly installed in the solar
flow separates the safety assembly from the heat ex-
changer. High pressure can result from the cylinder
heating up, which in turn can lead to in injury and
material damage.
Only close the ball valves for service.
!
Material losses
mineral oil-based products cause permanent damage
to the EPDm gaskets. This impairs the tightness. we
accept no liability, nor do we offer replacements under
warranty, for losses caused by gaskets damaged in this
way.
f
f
Never allow EPDm to come into contact with sub-
stances that contain mineral oil.
f
f
Use lubricants based on silicone or polyalkylen,
which do not contain mineral oil-based products.
2.2 Intended use
The solar compact installation enables the heat transfer me-
dium to be circulated through the solar circuit between the
collector and the cylinder indirect coil.
This appliance is intended for domestic use. It can be used
safely by untrained persons. The appliance can also be used
in a non-domestic environments, e.g. in small businesses, as
long as it is used in the same way.
Any other use beyond that described shall be deemed inap-
propriate. Observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
2.3 Test symbols
See type plate on the product.
3. Product description
The solar compact installation contains all important compo-
nents for installing the hydraulic circuit of a solar thermal sys-
tem. The solar compact installation connects the solar collector
array to the solar cylinder. The solar compact installation can
be mounted on the wall or directly to the cylinder using the
cylinder connection set (see "Accessories"). The solar compact
installation is fitted with thermal insulation to minimise heat
losses.
An integral non-return valve prevents an unintentional ther-
mosiphon effect. The heat stored in the solar cylinder cannot
be transferred if the circulation pump stops. The pump assem-
bly includes a thermometer for the flow and return, as well as
an optical flow meter.
!