Vehicle Scanner VS6400
Rev.E
13
Quiet Mode
Quiet Mode inhibits duplicate serial reports
with a value of zero.
Syntax:
QUIET Y
turns on this mode.
QUIET N
turns off this function.
Heartbeat Mode
Heartbeat Mode overrides delta and quiet
functions on an independent synchronous basis.
It uses two commands: one to enable and
disable the function and one to set the time
interval for these reports.
Syntax:
HBENA Y
turns on this mode.
HBENA N
turns off this mode.
Syntax:
HBTIME n
where n is the time interval in
seconds between heartbeat reports.
S
OFTWARE
D
EMAND
M
ODE
This function provides serial reports on
demand using a software demand request.
Ctl-E
is the request for a report.
Syntax:
DMD
sets the scanner to software trigger
mode and starts
Press
ESC
twice after entering this
command to continue with setup.
Section 6 – Serial Output
