background image

Safety Technology International, Inc.

2306 Airport Rd • Waterford, MI 48327

Phone: 248-673-9898 • Fax: 248-673-1246

[email protected] • www.sti-usa.com

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch

Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999

Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)

E-mail: [email protected] • Web: www.sti-europe.com

Inst. Sht. 8-Channel Wireless 04/11

WARNINGS

FOR INDOOR USE ONLY.  Keep RECEIVER away from water and/or damp areas.  When using lamp controller 

option, use ONLY 200 Watt or less incandescent lamps, and keep lamp away from bed coverings, curtains or 

other flammable materials as this may present a fire hazard.  The lamp controller CANNOT be used with 3-prong 

grounded plugs.  

WARRANTY INFORMATION:

Safety Technology International, Inc. warrants to the 

original 

consumer/purchaser that this product shall be free of defects in 

material and workmanship under normal use and circumstances for a period of one (1) year from the original date of purchase.

ACCESSORIES

STI-

34201  Wireless Mailbox Alert Sensor

STI-34301  Wireless Garage Sentry Sensor
STI-34401  Wireless Universal Alert Sensor
STI-34501  Wireless Pool Access Sensor
STI-34101  Solar Powered Driveway Monitor Sensor
STI-34151  Battery Powered Driveway Monitor Sensor
STI-34104  4-Channel Receiver
STI-34108  8-Channel Receiver
STI-34106  Keyfob
STI-34105  Voltamax 12 VDC (500mA) Power Supply
STI-30104  Lamp Controller

IMPORTANT NOTICE:

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, 

may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in 

a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures:    

- Reorient or relocate the receiving antenna   

- Increase the separation between the equipment or devices   

- Connect the equipment to an outlet other than the receiver’s   

- Consult a dealer or an experienced radio/TV technician for assistance

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept 

any interference, including interference that may cause undesired operation of the device. 

Changes or modifications not expressly approved by Safety Technology International, Inc. could void your authority to operate 

this equipment.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent 

isotopically radiated power (e.i.r.p.) is not more than that permitted for successful communication. 

This product meets the applicable Industry Canada technical specifications.  Le present materiel est conform aux specifications 

techniques applicables d’Industrie Canada.

Model: 34108          FCC ID: TXL34108    IC: 6335A-34108

OPTIONAL LAMP CONTROLLER ACCESSORY

The Lamp Controller will turn on a lamp any time your STI 8-CHANNEL RECEIVER is triggered.  Never come home to a dark 

house again, and let others think you are home when you aren’t. The Lamp Controller works with both the STI-34150 (battery) 

and the STI-34100 (solar) models.

Summary of Contents for STI-34108









Reviews: