— 3 —
COMPONENT DESCRIPTIONS (Top Side):
Switches (1- 8)
- For reference, information is also written on the RECEIVER case (located under Zone ID list).
1 - MIRROR MASTER OFF/ON
2 - NORMAL/ENROLL
3 - AUTO RESTORE/LATCH
4 - SIREN TIME/MIRROR#
5 - SIREN TIME/MIRROR#
6 - CHIME OFF/ON
7 - NORMAL/DELETE
8 - MIRROR SLAVE OFF/ON
Push Button
- Selects zone to enroll or delete, acknowledge latched alert (resets LED to GREEN), silences alarm.
LEDs (1- 8)
- Each enrolled SENSOR or mirrored RECEIVER has an LED that indicates the current state of that
zone from the top LED (Zone 1) down to the bottom LED (Zone 8). The zone states, in order of precedence, are:
• LED RED = zone alarm
• LED RED (flashing) = zone latched (zone was in alarm and returned to normal)
• LED AMBER = SENSOR trouble (battery or SENSOR tamper trouble detected)
• LED GREEN = zone normal
• LED off = zone not enrolled
Sounder
- Audio feedback for siren, chime/ beeps, zone enrollment and deletion.
DESCRIPTION
ON (Switch UP)
OFF (Switch DOWN)
SW1
MASTER RECEIVER SETTING
ENABLED
DISABLED
(Only active when SW8 = ON)
Switch on only for Mirror Master
Switch off if not Mirror Master
SW2
ENROLL DEVICES
ENABLED
DISABLED
LED for zone number waiting to enroll blinks. Normal Operation
Button used to change zone to be enrolled.
SW3
ALARM LATCHING
ENABLED
DISABLED
(Only active while
LED turns on when triggered
LED turns on when triggered
SENSOR is being enrolled) Button press turns off siren
LED flashes when restored
LED turns off when restored
Second button press turns off LED flashing
SW4
RECEIVER # / SIREN TIME
RECEIVER# (when SW8 = ON)
SIREN TIME (when SW8 = OFF)
and
Note: Siren can turn off upon button press.
ON = 1
(SW4)(SW5) 00 = Mirror #1
(SW4)(SW5)
00 = 0 Second (Silent)
OFF = 0
10 = Mirror #2
10 = 30 Seconds
01 = Mirror #3
01 = 180 Seconds
11 = Mirror #4
11 = Continuously ON
SW6
RECEIVER CHIME
ENABLED
DISABLED
Chime sounds a double beep
Chime does not sound when
when device is triggered.
device is triggered.
SW7
DELETE DEVICES
ENABLED
DISABLED
All LEDs turn red. LED blinks for zone to be Normal Operation
deleted. Hold button for 5 seconds to delete.
Hold button another 5 seconds to delete all.
SW8
MIRROR MODE
ENABLED
DISABLED
Enables Mirror Mode. Enables SW1.
Disables Mirror Mode. Disables SW1.
SW4/5 indicate RECEIVER#.
SW4/5 indicate ALARM TIME.
Turns on RECEIVER# (SW4/5) transmissions. Turns off mirrored transmissions.
SW5
Switch #
SIREN
SW4
SW5
TIME
MIRROR #
OFF
OFF
DISABLED
1
ON
OFF
30 SEC
2
OFF
ON
180 SEC
3
ON
ON
ON CONT
4
