emergency stop button for 2 seconds, leave the button and the machine enter into
parameters setting interface. The speed “+”& “-” button can be released.The speed
window show “0”and also the same as time window. The speed window shows
parameters code, while the time window show the corresponding parameter data.
2) Press “Start/Pause”button for eight times, the speed window will show “8”as
automatic lubricant distance. The time window show the original automatic lubricant
distance. In this status, the distance data can be reset through pressing the speed “+”&
“-” button. Setting over. Press the “Start/Pause”button to save the settings and also
shift to the time setting interface. The speed window will show “9” and the time
window will show the original automatic lubricant time.In this status, the time data
can be reset through pressing the speed “+”& “-” button. Setting over, pressing the
“Start/Pause”button to save the settings and also shift to the next parameters. Finally
press the emergency stop button and then release it to back to the ready model.
Notice:
1) Owing to the different using situation of each club, if necessary, please set the
automatic lubricant parameters as above step.
2) Check the oil in the oiler every each months and add the lubrication timely.
