-4-
LH
Fr
UP
Fr
RH
UP
3mm
→
6mm
→
9mm
3mm
→
6mm
→
9mm
LH
Fr
UP
2
！
Advice
Drill
cloth adhesive tape
！
Advice
After drilling, remove the burrs around
the hole.
2. Drill holes in the Spoiler assy-side.
( The RH side also performs the same work. )
1. Removal of Spoiler assy-side.
( The RH side also performs the same work. )
Spoiler assy-side
Spoiler assy-side
Masking tape
Masking tape
LH side
LH side
Bottom view
Rr side
Bottom view
Fr side
Match the shape
Match the shape
Align with the polygonal
line of the hinge.
Align with the polygonal
line of the hinge.
(1) Refer to the service manual and remove
the Spoiler assy-side from the vehicle.
(1) Align the pattern paper LH with the spoiler,
fix it with masking tape, and mark the center
of the hole with a needle.
(2) Make pilot holes at the marking positions in
the order of 3 mm and 6 mm, and finally
make a 9 mm hole.
Cover the 9mm hole with masking tape
so that it is not mistaken for the hole for
the
②
wellnut.
！
Advice
Masking tape
9mm hole
During drilling, put a cloth adhesive tape
as a stopper around the drill blade about
5mm from its tip in order to prevent
damages to the
Spoiler assy-side
.
5mm
1
