Caution
Advice
When jacking up the vehicle, be sure to place it on a hard surface where the ground is
horizontal and the jack does not bite into it, and be sure to support it with a rigid rack
before performing the work.
To prevent the STI Side Under Spoiler from being deformed or damaged, please
observe the following when using a two-pillar lift.
！
！
-3-
①
Set the car slope on the vehicle and secure the ground clearance.
②
Adjust the screw height of the dish parts and set it so that the lift arm does not
interfere with the STI Side Under Spoiler.
Lift arm
STI Side Under Spoiler
Spoiler assy-side
Interference
Caution
Sectional view
Side panel
Adjust screw height
Dish parts
Make it 10 mm
or more
③
Set so that the lift arm does not overlap with the drilling position.
