②
③
④
⑤
型紙
ＬＨ
SIDE UNDER SPOILER
////////////////////////////////////////// //
/ //////
/
/
//
///////////////////////////
SPOILER SIDE
REAR
HINGE LINE
ＬＨ
FRONT
SIDE UNDER SPOILER
//////////////////////////////////////
//
/
//
/
//
/ ////////////
/////////////////////////////////
SPOILER SIDE
//
/
//
/
//
/
/
HINGE LINE
ＲＨ
SIDE UNDER SPOILER
REAR
//
//
//
//
///
///
///
//
//
//
//
///
///
//
//
///
///
///
//
//
/ /
/
/
/
//
///
///
///
///
///
///
///
//
///
/
SPOILER SIDE
HINGE LINE
//
///
//
//
///
///
///
///
///
///
//
///
//
//
/ /
//
/
//
/
//
//
//
//
//
///
//
//
//
///
///
//
//
///
//
///
///
//
///
//
/
//
/
//
/
//
/
/
SIDE UNDER SPOILER
ＲＨ
FRONT
SPOILER SIDE
HINGE LINE
①
Components
Tools
-2-
Before Work
①
②
RH:1 /LH:1
No.
Qty
Part Name
STI Side Under Spoiler
20
- Make sure to check the components below before installation.
- When installing this product, park the car on a level ground and apply the parking brake.
- When installing this product, be sure not to damage the car body.
- Before installing this product, wipe off any dirt or oil film from the Side Spoiler attachment surface
with a soft waste cloth dampened in a neutral detergent.Then, let it dry completely before work.
- The adhesive strength is weakened significantly when the temperature is 15
℃
or lower.
In this case, use a dryer to warm up the double-sided tape before attachment.
(Do not warm excessively as doing so may result in deformation.)
- Be extremely careful not to let this product get wet by washing, etc. for 24 hours after attaching it.
Dosing so may cause the product to come off.
- To protect yourself from burns, make sure to stop the engine and let it cool completely before work.
- When jacking up the vehicle, be sure to keep the ground level and a hard place where the jack does
not bite, and be sure to support it with a rigid rack before carrying out the work.
③
④
⑤
Pattern paper RH/LH (P8)
20
4
φ3mm φ6mm φ9mm φ9.5mm
Clip
1
Wellnut
Bolt
8mm
