Appendix C Hayes AT Command Reference
RFI-9256 Radio Modem User Manual
Page 94 of 109
ATS47=15<CR>
: Sets the frame time to 15ms.
ATS47=20<CR>
: Sets the frame time to 20ms.
ATS47=25<CR>
: Sets the frame time to 25ms.
ATS47=30<CR>
: Sets the frame time to 30ms.
ATS47=35<CR>
: Sets the frame time to 35ms.
C.2.14
“ATS48” Frame Bias
S-register 48 sets the frame bias of the radio. The only valid frame bias values are:
ATS48=0<CR>
: Disables frame bias (sets the bias to 50/50).
ATS48=1<CR>
: Sets the frame bias to outgoing/upload. This means that more data can flow out
from this unit over the air.
ATS48=2<CR>
: Sets the frame bias to incoming/download. This means that more data can flow into
this unit from the air.
C.2.15
“ATS50” Network Address
S-register 40 sets the network address of the radio. All radios on a single network must have the same
network in order to communicate. Valid values are between 0 and 63.
ATS50=54<CR>
: Sets the network address to 54.
C.2.16
“ATS51” Unit Rx address
S-register 51 sets the units local address. Local addresses are in the range 1 to 9999.
ATS51=1001<CR>
: Sets the units address to 1001.
C.2.17
“ATS52” Unit Tx address
S-register 52 sets the destination address for point-to-point traffic from this unit. Destination addresses are in
the range 0 to 9999.
ATS52=2027<CR>
: Sets the point-to-point destination address to 2027.
C.2.18
“ATS60” Set Logging Level
S-register 60 sets the current radio log level. The only valid values are:
ATS60=0<CR>
: Only errors are logged.
ATS60=1<CR>
: Warnings and errors are logged.
ATS60=2<CR>
: Status information, warnings, and errors are logged.
