STG global TANVAC HDV3000, Operator'S Manual

Page: 106 / 329

Inspecting the Primary Air Cleaner
Elements
Illustration 45 g00281693
Inspect the clean, dry primary air cleaner element.
Use a 60 watt blue light in a dark room or in a similar
facility. Place the blue light in the primary air cleaner
element. Rotate the primary air cleaner element.
Inspect the primary air cleaner element for tears and/
or holes. Inspect the primary air cleaner element for
light that may show through the filter material. If it is
necessary in order to confirm the result, compare the
primary air cleaner element to a new primary air
cleaner element that has the same part number.
Do not use a primary air cleaner element that has
any tears and/or holes in the filter material. Do not
use a primary air cleaner element with damaged
pleats, gaskets, or seals. Discard damaged primary
air cleaner elements.
Storing Primary Air Cleaner Elements
If a primary air cleaner element that passes
inspection will not be used, the primary air cleaner
element can be stored for future use.
Illustration 46 g02595738
Typical example
Do not use paint, a waterproof cover, or plastic as a
protective covering for storage. An airflow restriction
may result. To protect against dirt and damage, wrap
the primary air cleaner elements in Volatile Corrosion
Inhibited (VCI) paper.
Place the primary air cleaner element into a box for
storage. For identification, mark the outside of the
box and mark the primary air cleaner element.
Include the following information:
• Date of cleaning
• Number of cleanings
Store the box in a dry location.
i01432811
Engine Air Cleaner Element
(Single Element) - Inspect/
Replace
SMCS Code: 1054-040; 1054-510
S/N: C6F1–Up
S/N:
C7H1–Up
S/N:
C6J1–Up
S/N: C6L1–Up
S/N: G7L1–Up
S/N: C6M1–Up
S/N: C6N1–Up
SEBU8312-03 69
Maintenance Section
Engine Air Cleaner Element (Single Element) - Inspect/Replace