STEYR MO114K33, Operation, Maintenance And Warranty Manual

Page: 13 / 118

13
Symbols
Certain symbols or combinations of symbols may appear on your STEYR MOTORS Marine Engine or on its acces-
sories. It is very important that you understand their meaning or purpose. If any symbol is not clearly understood, see
your DEALER.
“Safety Warning” Symbols
“Position Indicator” Symbols
“Condition” Symbols
“Functional Description” Symbols
“Instructional” Symbols
Means risk of SERIOUS injury is present.
Follow instructions in the Operation,
Maintenance & Warranty Manual before
using motor or accsessory.
Indicates that contents are under
pressure.
Indicates upward movement.
Example: While boat is at planing speed,
activating trim switch to raise the bow of
the boat.
Means place shift control in NEUTRAL
before starting motor. Follow instructions in
Operation, Maintenance & Warranty Manual
before starting motor.
Identifies poisonous material.
Indicates that ELECTRICITY of more than
50 volts is present.
Indicates a potential fire hazard.
Indicates gear shift control positions:
FORWARD, NEUTRAL and REVERSE
Indentifies the meter which indicates
accumulative running hours of engine.
Identifies battery or a meter wich
indicates status of battery-generator
charging system.
Identifies the meter which indicates
engine coolant temperature.
Identifies the meter which indicates
battery voltage or amperage.
Indicates the amount of liquid in tank.
FILTER: Identifies a device which
removes contaminants from engine’s
oil system.
Identifies the meter which indicates
engine speed expressed in revolutions
per minute.
Indentifies the meter which indicates
engine coolant pressure.
Identifies the meter which indicates the
pressure of engine’s lubricating system.
FILTER: Identifies a device which
removes contaminants from fuel.
Identifies the negative ground or
negative voltage connection.
Identifies the STOP SWITCH.
It may also identify STOP position of
the throttle control.
Identifies the EMERGENCY IGNITION
CUT-OFF SWITCH.
Emergency engine stop.
Identifies engine drain plugs and fittings.
FUSE: Identifies a device which protects
the electrical system from overload.
Identifies the operating device for starting
the motor.
Indicates FUEL is to be used or
FUEL is present.
Indicates OIL is to be used or
OIL is present.
Means read your Operation,
Maintenance & Warranty Manual
before operating the product. It contains
information or instructions vital for
operation of product.
ENGINE OIL FILL: Location for
introduction of oil into the engine.
Indicates areas to be lubricated.
Indicates lubricating oil used in
transmissions.
Indicates downward movement.
Example: While boat is at planing
speed, activating trim switch to lower
the bow of the boat.
or