STEYR MO114K33 Operation, Maintenance And Warranty Manual Download Page 3

Page: 3 / 118

WELCOME ABOARD

Congratulations on your decision of choosing a STEYR MOTORS marine

engine for your boat, and we hope you will enjoy it.

STEYR MOTORS GmbH

has developed a high-speed diesel engine with

two stage high-pressure fuel injection specifically for the marine environ-

ment. STEYR MOTORS marine engines are designed to be adapted to

various propulsion systems.

To come up to your expectations, please study thoroughly this manual for

your new

STEYR MOTORS marine engine

to get sufficient information on

its operation and handling and to permit an optimal use of the various built-

in functions.

With kind regards,

STEYR MOTORS GmbH

After Sales Service

Im Stadtgut B1

4407 Steyr, Austria

www.steyr-motors.com

Edition, July 2011

P/N Z001022/0

YOUR STEYR MOTORS

MARINE DEALER

Summary of Contents for MO114K33























































































































Search results

Summary of Contents for MO114K33

Reviews:

STEYR MO114K33, Operation, Maintenance And Warranty Manual, Page: 3 / 118

Search results

Summary of Contents for MO114K33

Reviews: