Stewart Filmscreen
– Cabaret
32
FASCIA REMOVAL
Cabaret offers a two-piece construction that allows the front fascia to come off for servicing. This
allows easy access to the control system and roller tube assembly without having to take the entire
unit down. To remove the fascia:
1. Remove acrylic glass from top of case. Simply lift up with
your fingers and place in a safe location (see Figure 36).
2. Lift bottom of fascia through screen slot opening
by pulling in an upwards motion towards the front of
the case (see Figure 37).
3. Lift in an upwards motion once the bottom clip
is free, and remove the fascia (see Figure 38).
Set aside in a safe location.
Installation is the reverse of the uninstalling instructions.
Figure 37:
Audience left, front of
unit, showing fascia tilted forward
Figure 36:
Audience left, front of
unit, showing acrylic glass removed
Figure 38:
Audience left, front
of unit, showing fascia removed
