Preparation
Specifications regarding the individual screen dimensions, weight, mounting
type, and controls are provided by the factory when the unit is ordered.
Before beginning the installation:
Check the specifications for the type of frame and mounting to be
used.
For screens with a motor, prepare for electrical access.
Make sure there is a clean surface on which to unroll the screen.
Check the size and weight of the screen to be installed so that
you can plan for the number of people required for the mounting
procedure. You need at least two people to mount the smaller
screens; more are needed for larger, heavier screens.
You will need:
Gloves, for handling the screen.
Ladders for the personnel supporting the screen during the
mounting process, as needed.
A level.
Fasteners appropriate for the surface on which the screen is
being mounted (See instructions for the type of mount for
recommendations.)
Drills for making holes to attach brackets to the mounting surface,
as needed.
Tools for tightening fasteners
Note:
Bolts and other fasteners for the screen are standard gauge and
sizes used in the U.S., regardless of where they will be installed. For this
reason, the sizes are expressed in inches rather than metric measurements.
Unpacking
Be sure to unpack carefully in a clean area. Use special care when
handling the screen so that it does not become soiled or damaged.
If you plan to repack your screen and hardware for transportation to another
location, you may wish to photograph or make a note of how it was packed.
Keep the packing material.
Luxus ScreenWall Series: Owner’s Manual
3
G
ENERAL
N
OTES FOR
P
REPARING THE
I
NSTALLATION
Before proceeding with the installation of this screen,
take time to thoroughly read and understand these
installation and operation instructions.
All electrical wiring installations must conform to local
and national codes and should be performed by
qualified service personnel.
There are no user-serviceable parts contained within
the unit.
.