manualshive.com logo in svg

Stewart Filmscreen Corp Luxus ScreenWall Series, Owner'S Manual, Page: 13 / 32

Share
Download
Stewart Filmscreen Corp Luxus ScreenWall Series Owner'S Manual Download Page 13

Luxus ScreenWall Series: Owner’s Manual

11

Q

UICK

S

NAP

W

ALL

M

OUNT

Professional mounting techniques should be used.  Stewart Filmscreen
Corporation cannot be liable for substandard or faulty installations.

This section describes assembly of the Quick Snap wall mount ScreenWall.

Assembling the frame

Figure 13:

Frame assembly

1. Locate the wall studs

and determine the
mounting location.

2. Insert the sliding nuts

that will hold the wall
bracket into the
channel in the frame.
Repeat for each
bracket. Refer to
Figure 12.

Note:

Brackets can

slide horizontally so
you can position them
precisely, to stud
locations.

3. Connect the frame

members by matching
the colored, numbered
dots on the ends of
the members. Refer to
Figure 13.

4. Secure the frame

members with the
supplied 5/16-18 x
3/4” hex head bolts. 

5. Attach the wall

brackets to the frame.
Secure the brackets
with the supplied 1/4-
20 x 3/8” button head
screw to previously
inserted sliding nuts.

Be sure the lock
washer is inserted
between the button
head screw and the
bracket. Refer to
Figure 14.

Figure 14:

Attaching wall brackets to frame; detail (inset)

Figure 12:

Placement of bracket bolt in frame channel

Sliding Nut

Button Head Screw

Lock 

Washer

Summary of Contents for Luxus ScreenWall Series

































Reviews:

No comments