manualshive.com logo in svg

Stewart Filmscreen Corp Luxus ScreenWall Series, Owner'S Manual, Page: 16 / 32

Share
Download
Stewart Filmscreen Corp Luxus ScreenWall Series Owner'S Manual Download Page 16

This section describes assembly of a self-supporting ScreenWall.  It may
use an optional tilt bar and optional casters.

Assembling the frame

Each side of the frame may be in one piece, with the sides joined at the
corners, or, for larger frames, the longer sides of the frame may have
segments that must also be joined.

14

Stewart Filmscreen Corporation

T-

STAND

S

ELF

-

SUPPORTING

S

CREEN

W

ALL

1. Connect the four

pieces by matching
the colored, numbered
dots on the ends of
the frame pieces. See
Figures 21 and 22.

2. Secure with the

supplied bolts.

3. Go to the section on

mounting the screen
to the frame (page
24), then return to this
section to continue.

Figure 19:

T-Stand

Figure 20:

T-Stand with optional
tilt bar and casters

Figure 21:

Standard frame assembly

Figure 22:

Frame assembly for jointed frames

Professional mounting
techniques should be used.
Stewart Filmscreen Corporation
cannot be liable for
substandard or faulty
installations.

Summary of Contents for Luxus ScreenWall Series

































Reviews:

No comments