Stewart Filmscreen Corp Cima, Owner'S Manual & Installation Instructions

Page: 5 / 17

Preparation
‹ Check the specifications for the type of frame and mounting to be
used.
You will need:
‹ A level
‹ Fasteners appropriate for the surface on which the screen is
being mounted (See instructions for the type of mount for
recommendations.)
‹
Tools for tightening fasteners
Unpacking
Be sure to unpack carefully in a clean area. Use special care when
handling the screen so that it does not become soiled or damaged.
If you plan to repack your screen and hardware for transportation to another
location, you may wish to photograph or make a note of how it was packed.
Keep the packing material.
G
ENERAL
N
OTES FOR
P
REPARING THE
I
NSTALLATION
‹
Before proceeding with the installation of this screen,
take time to thoroughly read and understand these
installation and operation instructions.
‹
Drill for making holes to attach brackets to the mounting surface,
as needed
‹ Check the size and weight of the screen to be installed so that
you can plan for the number of people required for the mounting
procedure. You need at least two people to mount the smaller
screens; more are needed for larger, heavier screens.
‹ Make sure there is a clean surface on which to unroll the screen
and assemble the frame
.
Specifications regarding the individual
s
creen dimensions, weight, and
mounting type are provided by
t
he factory when the unit is
o
rdered.
Befor
e
beginning the installation:
Note: Bolts and other fasteners for the screen are standard gauge and
sizes used in the U.S., regardless of where they will be installed. For this
reason, the sizes are expressed in inches rather than metric measurements.
©
2015
Stewart Filmscreen Corporation
4
‹
Ladders for the personnel supporting the screen during the
mounting process, as needed
‹
Clean cotton g
loves, for handling the screen