background image

LIMITED ONE YEAR WARRANTY 

STEWART FILMSCREEN CORPORATION (Stewart) warrants its Cima by Stewart Filmscreen products to the 

original purchaser only, to be free from defects in materials and workmanship for a period of one

(1) year from the date of purchase by the original purchaser or eighteen (18) months from date of manu-

to Stewart instructions and are not damaged due to improper handling or treatment after shipment from 

the factory. This warranty does not apply to equipment showing evidence of misuse, abuse, or accidental 

damage, including neglect caused by improper installation (i.e. proximity to hot lights, exposure to ex-

treme heat or cold, exposure to excessive humidity, etc.). Stewart on-site warranty repair services are not 

available for this product

Stewart’s sole obligation under this warranty shall be to repair or to replace (at Stewart’s sole discretion)

the defective part of the merchandise. This warranty expressly does not cover any costs of removal, in-

stallation, framing, or other costs incident to replacing the screen or returning it to Stewart. Returns for 

service should be made to your Stewart dealer. If it is necessary for the dealer to return the screen or part

to Stewart, transportation (freight) expenses to and from Stewart are payable by the purchaser. Stewart is

not responsible for damage in shipment. To protect yourself against damage or loss in transit, insure the

product and prepay all transportation expenses.

mandated by statute or rule of law are limited to the one (1) year warranty period. This warranty gives 

will Stewart be liable for sums in excess of the purchase price of the product. No liability is assumed by 

Stewart for expenses or damages resulting from interruption in operation of equipment, or for incidental,

direct, or consequential damages of any nature.

In  the  event  that  there  is  a  defect  in  materials  or  workmanship  of  a  Cima  by  Stewart  Filmscreen, 

you may contact our Customer Service Department at 1161 W Sepulveda Blvd, Torrance, California 90502-

2797 (310-784-5300) Toll free (800-762-4999).

IMPORTANT: This warranty shall not be valid and Stewart shall not be bound by this warranty if the prod-

uct is not operated and maintained in accordance with Stewart’s written instructions.

Stewart Filmscreen Corporation shall not be liable for any and all consequential damage(s) occasioned 

by the breach of any written or implied warranty pertaining to the sale of Cima by Stewart Filmscreen 

product in excess of the purchase price of the product sold.

Printed in USA. Rev. 

4

/

22

/2015

resolution

15

©2015 Stewart  Filmscreen Corporation

Summary of Contents for Cima


















Reviews: