DSP 4x4 Operations Manual Rev E
Page 9
6
Controls and Indicators
1.
USB 2.0 Connector: used for DSP programming
2.
Power Indicator LED: illuminates when power is applied
3.
Power Connector (3.5mm): connect power adapter supplied with unit only
4.
Output Connectors (3.5mm): connect to input of next device in the signal chain
5.
Input Connectors (3.5mm): connect to source(s)
6.
Phantom Power Indicator LEDs: illuminate when phantom power is applied to the
corresponding channel (in DSP Control Center program)
7.
RS-232 Connector (3.5mm): connect to RS-232 controller (optional)
③
①
②
④
⑤
⑥
⑦
