Project Checklist
Kit Contents
☐
Laser cut wood (5 Sheets)
☐
Laser cut acetate windscreen
☐
Build Instructions
☐
Computer drawn plan set (2 Pages)
☐
Laser Cut Acetate Windscreen
Taped to back of wood brick:
☐
1 - 1/32 in. x 12 in. wire
☐
2 - 0.020 in. x 12 in. wire
☐
Hardware Bag
1 - 1-1/2 in. length of 1/16 in. heat shrink tube
1 - 4 in. length of 1/8 in. dia. hardwood dowel
1 - Basswood elevator joiner “E5”
6 - #16 Rubber Bands
Suggested Electronics (Available at StevensAero.com)
☐
Spektrum DSM2 2.4ghz transmitter with at least 3 channels
☐
Parkzone or Spektrum ultra micro receiver/esc/servo “brick” [PKZ3351] or [SPMAR6400]*
☐
Parkzone motor and gearbox [PKZ3624]
☐
130mm x 70mm Propeller [EFL9051]
☐
3.7V 120-160mAh LiPo compatible with Parkzone / Spektrum “brick”
Optional Brushless Electronics (Available at StevensAero.com
☐
Spektrum DSM2 2.4ghz computer programable transmitter
☐
SA Sport Park BL180 (2200KV)
☐
5 x 3 GWS HD Propeller
☐
Spektrum ultra micro receiver/esc/servo “brick” [SPMAR6400LBL]*
☐
7.4V 120-160mAh LiPo compatible with Spektrum “brick”
*Requires computer radio with available custom channel mixing function.
Required Building Supplies and Tools
☐
Du-Bro RC 1-1/4 in. Wheels [DUB125MW]
☐
1/2 oz. Medium CA Glue
☐
1/2 oz. Thin CA Glue
☐
CA glue applicator tips
☐
CA glue accelerator (kicker)
☐
Balsa filler
☐
Hobby Knife with ample supply of #11 blades
☐
Sanding block with 400 and 600 grit paper
☐
Heat Gun and Covering Iron
☐
Small Needle Nose Pliers
☐
1/2 in. x 1 in. length sticky back velcro
☐
1/2 in. wide clear tape
☐
Servo mounting tape
Optional Building Supplies and Tools
☐
1/2 oz. Thick CA Glue
☐
Modeling Clay for Ballast
☐
CA glue de-bonder
☐
Long sanding bar
☐
Masking Tape (Low tack painters tape)
☐
Soldering Iron
Build Instructions
© 2010 Stevens AeroModel all rights reserved.
!
Page 3 of 12