© 2004 Stevens AeroModel.
Page 4 of 33
REQUIRED TO COMPLETE KIT:
Kit Contents
:
Rolled Computer Drawn Plan Sheets
Illustrated Instruction Manual
Laser Cut Balsa and Hardwood Parts Sheets (See Parts Inventory Sheet)
1 - Clear Canopy
1 - Cowl Assembly
Large Hardware Bag
•
2 - 1/8” x 4.5” hardwood dowel.
•
2 - 1/8” x 1.25” hardwood dowel.
•
2 - 1/32” x 12” Music Wire.
•
2 - 3/32” x 7-7/8” Music Wire.
•
1 - 1/32” ID x 12” Plastic Tubing
•
1 - 1/8” x 6” aluminum tube.
•
1 - 8” Length of Velcro Tie Wrap.
Small Hardware Bag
•
8 - #0x3/16” Screws and Wrench (Wheel Pant Hardware).
•
1- 2” Length of Kevlar Thread.
•
1 - 1/16” x 1/4” aluminum tube.
•
CA Hinges.
•
2 - Clear Pull/Pull exit re-enforcement rings.
Recommended Finishing Items
:
1.
Dubro DUB150MW 1.5” Mini lite wheels or 1-7/8” Hobby Lobby LYT Wheels (2-Pack) if using wheel pants.
2.
Sullivan 1/2” Micro Tail wheel.
3.
Dubro Micro Pull/Pull Assembly DUB846
4.
Dubro Mini E/Z Connectors DUB845
5.
1-2 Roll(s) of Solarfilm So-Lite, Nelson Lite, or Ultracote Lite – Iron on Film Covering.
Suggested Radio Gear:
1.
4-5 Channel Transmitter (4ch using “Y” harness for ailerons)
2.
4 - Sub Micro Servos (Hitec HS-55 or equivalent)
3.
1 - 6” Y-Servo Extension
4.
2 - 12” Servo Extension
5.
1 - Micro Receiver
6.
1 - 25A ESC (Castle Phoenix 25 recommended)
Suggested Power Systems:
Hacker B20-15L 4:1 / 10x5-11x5.5 APC Thin Electric / 9-10 Cell Nimh or Nicad 2/3A planform or 3 cell Lipoly
capable of 16A Continuous 22A Burst.
Axi 2808/20 / 9x5-10x5 APC Thin Electric / 9-10 Cell NIMH 2/3A or 3 cell Lipoly capable of 16A Continuous
22A Burst.
Axi 2808/24 / 10x5-11x5.5 APC Thin Electric / 9-10 Cell NIMH 2/3A or 3 cell Lipoly capable of 16A Continuous
22A Burst.
Other Items You Will Need:
1.
Thin CA (super glue)
2.
Five Minute Epoxy
3.
Wax Paper or Plastic Wrap
4. Razor
Blade(s)
5.
Fine Grit Sand Paper
6. Rat-Tail
File
7. Clear
Tape
8.
Balsa Wood Filler
