© 2004 Stevens AeroModel.
Page 15 of 33
16. Key parts F16 on either side of F15. The parts laminate to F15 and key into the provided tabs on FT4.
17. Install pre-cut 1/16” stringer stock spanning F6, F7, and F14 – Stringers are slightly over-length – remove the
excess and sand flush with former F14.
18. Key parts F11 and F13 to fuselage top decking. Note orientation of F13 instrument panel and decide if you
want it hidden or exposed. Key center spine F12 spanning F11 and F13. Fill in remainder of slots with pre-cut
stringer stock. Once satisfied with fit, glue the assembly together by running thin CA along all inside surfaces.
(Note the servo tray included with the beta kit). Stringers are slightly oversized sand excess stringer length
flush with F11 and F13.
