STERWINS 3276000241980, Assembly, Use, Maintenance Manual

Page: 52 / 61

EN
51
3. Use only the manufacturer’s
recommended replacement parts
and accessories.
4. Inspect and maintain the product
regularly. Have the product
repaired only by an authorised
service centre or similar qualified
specialist.
5. When not in use, store the product
out of the reach of children.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
1. Only use the product as intended by
its design and these instructions.
2. Ensure that the product is in good
condition and well maintained.
3. Use correct attachments for the
product and ensure they are in
good condition.
4. Keep tight grip on the handles/grip
surface.
5. Maintain this product in accordance
with these instructions and
keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread
any high vibration tool use across a
longer period of time.
Emergency
Familiarise yourself with the use
of this product by means of this
instruction manual. Memorise the
safety directions and follow them to
the letter. This will help to prevent
risks and hazards.
1. Always be alert when using this
product, so that you can recognise
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
2. Switch off and disconnect from
the power supply if there are
malfunctions. Have the product
checked by a qualified professional
and repaired, if necessary, before
you operate it again.
Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection
with the structure and design of this
product:
SAFETY INSTRUCTIONS