12
13
1-4 DROP KEY: The 1-4 drop keys allow the user to choose the desired
soap quantity at liquid soap dispensers.*
Indication: continuous blinking of the LED in the sensor eye.
*The exact dosage depends on soap viscosity.
SOAP QUANTITY: Press the Soap button. Wait until a quick flashing of
the LED in the sensor eye is perceived. Then, press + to increase the
soap quantity and – to decrease it.
Indication: Continuous blinking of the LED in the sensor eye.
AIR RATIO
:
Press the Air button. Wait until a quick flashing of the LED
in the sensor eye is perceived. Then, press + to increase the air ratio
and – to decrease it.
Indication: Continuous blinking of the LED in the sensor eye.
FILL BUTTON: To prime the soap: once the soap tank has been
filled / re-filled, press the FILL button. The pump will run for one
minute for priming the soap to the soap dispenser spout.
To stop this activity press the FILL button again. If the soap has not
started coming out of the spout, press the Fill button again.
TEmPORARY OFF FUNCTION: This function is ideal to perform any
kind of activity in front of the sensor without operating the system
(for example, cleaning).
Faucets and or soap dispensers will remain shut for
1
minute when
this button is pressed once.
To cancel this function and to return to normal operation press the
On/Off button again or wait
1
minutes.
NOTE: To enter the self adjusting mode, use the ADJ button. To change the sensor
range, use the RANGE button.
remote coNtroL FUNctioNS - Soap & Water
remote coNtroL FUNctioNS - LiGHt
Description
:
The LED color selector kit is used to control the color of the LED lighting. This selector kit has
several functions such as gradually changing lighting, flash and fade.
1-oN / oFF
The lighting can be turned on / off using the two top right buttons.
R
G
B
W
on
off
flash
stRoBe
fade
smooth
2
1
3
4
2-coLor BUttoNS
The color of the lighting can be changed to one of
sixteen optional colors.
3-BriGHtNeSS
The brightness of the LEDs can be adjusted using
the two top left buttons.
4-FUNctioNS
There are four functions of active lighting: flash,
strobe, fade and smooth. These can be selected
using four selector keys. The ‘velocity’ of these
functions can be adjusted using the Brightness
buttons.
0.7 to 0.9
1.2 to 1.6
1.6 to 1.9
2.1 to 2.3