Page 6
2.3.
Remove back panel
Unplug the left ramp exit opto set, and the back panel lights from the main harness. Note where the assembly is
plugged into the harness.
Using the 1/4” nut driver, remove the 8 screws and washers from the back of the back
panel. Set screws and washers aside. Next, using the #2 phillips screwdriver, remove the 3 screw from the
bottom of the playfield that are screwed into the back panel. Carefully slide out the back panel, make sure not
to scratch the left ramp cover. Note: the left ramp cover is attached to the back panel.
