10
SERVICE MENU CONTINUED
DIAGNOSTICS
SWITCH
Switch Test: Close each switch by hand and observe the display. If the
switch is working properly it will display the name and corresponding number
of the switch when it is actived.
Active Switch Test: Shows all active switches on the playfield. This test is
useful for identifying if a switch is stuck.
The Diagnostics Menu is used to access various tests to verify that your
machine is working properly or to help diagnose potential problems.
COIL
Coil Test: Used to test individual coils on the playfield. Use the left and right
flippers to select a coil to test. Press the start button to fire the coil.
CAUTION: Keep hands clear from playfield while testing coils.
Cycle Coil Test: Automatically cycles through all coils on the game to
verify complete functionality. Observe the playfield and make sure each
corresponding coil fires as the game cycles through each.
LAMP
LED Test: Selects individual lights to flash on the playfield. Use the left and
right flippers to cycle through all the lights on the game. The corresponding
light flashes as it is displayed on the screen.
All LED Test: The CPU will illuminate all LEDs on the playfield. Useful for
identifying possible non-functioning LEDs without cycling through every light.
G.I. (General Illumination): Lights the three general illumination areas of the
playfield at the lower, middle, and upper areas of the game. Use the flipper
buttons to cycle through each.
NODE
Node Test: Checks the status of the node boards. In this case the CPU
Node 0 and the Playfield Core Node 8.
Summary of Contents for Marvel Spider-man The Pin
Page 14: ...14 Driver Location Map...
Page 16: ...16 Switch Location Map...
Page 19: ...19 Light Location Map...
