3
PRE-INSTALLATION INFO
CHECK CONTENTS
Separate all parts from the packaging and check each part with the pack contents
section. Pay attention to the variations of the different models.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic faucet until you obtain
the missing parts.
PREPARATION FOR INSTALLATION
Flush the water supply lines thoroughly before installing the faucet. Do not allow dirt,
teflon tape or metal particles to enter the faucet. Shut off the water supply.
IMPORTANT
All plumbing is to be installed in accordance with applicable codes and regulations.
Pay attention that the dimensions of the mirror compartment fits the dimensions of the
faucet plate.
WARNING
1) To avoid reflection problems keep a
distance of more than 300 mm. between
the sink and the spout.
2) This faucet model, with an infrared
sensor pointing down, is not intended to
be used together with a sink of a reflec-
tive material such as stainless steel.
3) If a sink strainer is straight below the
faucet sensor, use a strainer with a non
reflective finish (do not use a chrome
plated one).
Min 300 mm.
Bottom of the washbasin
