ASSEMBLY INSTRUCTIONS
The screws for the rotisserie bracket are already screwed into the left side of the grill
housing. Remove the screws and assemble the rotisserie motor bracket as shown in
the figure below.
If the burner will not light after several attempts then the burner can be match
lit.
If you’ve just attempted to light the burner with the igniter, allow 5 minutes
for any accumulated gas to dissipate. Keep your face and hands as far away
from the grill as possible. Insert a lit extended match (using the chain & match
holder shown in the figure) or lighter through the cooking grids to the burner.
Press the control knob and rotate left to the HI setting, continue to press the
knob until the burner ignites. Burner should light immediately. If the burner
does not light in 4 seconds turn the knob off, wait 5 minutes and try again.
10
