Document #
6 of 19
Revision Date
82070-248, Revision A
1/19/2009
Step 3: Connecting the Video Inputs
The video input cable(s) should be attached to the appropriately labeled ports on the back of the monitor as
shown below. The following inputs are available:
•
Video (RCA)
•
S-Video
•
Component
YPb/Pr
•
DVI
(DVI-D)
•
RGB
•
RS-232C
•
Dual SDI (optional)
Cable Input
Video Signal Input
You can select Video input from 3 connections listed below*:
Video signals
Connection type
Video
RCA
S-Video
4 pin Din Connector
(Y Pb/Cb Pr/Cr)
8 pin Din Connector
*If a video input is not chosen, a suitable signal is automatically selected
(only if the Source Auto Detection default is set to “On”).
Port Name
Remark
Video-IN input connector
RCA
S-Video input connector
Mini Din 4 pin
Y-Pb-Pr (Y-Cb-Cr) inputs
Mini Din 8 pin
DVI input connector
DVI-D 24 pin
RGB input connector
D-Sub 15 pin
RS232C-IN input
D-Sub 9 pin
Dual SDI (optional)
Two BNC connectors
RS485 (optional)
One In, One Out
SDI 1 SDI 2 SDI/O
RS232
